ASSA Connect 410 S MPL


Reinforced multi-point lock for additional resistance to burglary, provided with reinforced hook bolt and hook bolts.

Area of use

  • Reinforced multi-point lock for additional resistance to burglary.
  • For entrance door and security door, in villas, apartments, service buildings etc., where approved locking device exists. Suitable locks when necessary for increased security.


  • 360 degree key-turn.
  • Meets the requirements of Swedish Standard SS 3522, ed. 4, Class 3 TR29.
  • Included in the insurance approved lock,

    available with cylinder on the inside and on the outside.
  • Available with backset 50mm.
  • Lock depth 64 mm.
  • Central lock with lever latch and reinforced hook bolt.
  • Patent applied for capsulated deadlocking.
  • 2 extra hook bolts.
  • Provides interlocking joints between the door and frame for added security.
  • Handing of the lever latch is reversible.
  • Hardened steel lever latch for fire-rated doors.
  • Stainless steel bar plate 24 x 3 mm.
  • Manufactured in lengths of 1000 mm and above, standard length is 1700 mm and 1000 mm. 
  • Optional; Auxiliary locks, micro

    switch, 22 mm rail width.


  • When the door is unlocked, the hook and hook bolt are retracted. The lever is in operation and keeps the door in place in the closed position.
  • The handle is in a horizontal position and is pushed down to open the door. The door can be closed without pushing the handle down.
  • The door is locked when the handle is lifted upwards. The handle returns to a horizontal position.
  • To lock: lift the handle to lock out the hook bolt and hook bolts, turn the key 360 degrees to interlock the lock case. 
  • To unlock: turn the key 360 degrees to lift the interlock and open the door by pushing down the handle that draws in the latch, bolt and hook bolts.
  • ASSA Connect MPL series is designed to meet the highest security requirements where double cylinder is part of the specification. For this reason it is recommended to use double round cylinder, approved in accordance with SS3522 Class 3.


Striker plate

  • For the center unit: ASSA's Security strike 1487-1, 1487-5, 1487-11, or 1487-13. 
  • The hook bolts: ASSA security strike plate 1488-1, 1488-2, 1488-3 or 1488-4.
  • ASSA handle with return spring.


This product is designed in order to make their life cycle provide minimal impact on the environment. The product is recycled as scrap metal, any micro-switches are separated and recycled as electronic waste.

Do you want to create a safe lock environment?

ASSA OEM has created "The lock guide by ASSA OEM", and it's made to give you knowledge and tips about approved lock sets. We really encouring poeple to read our tips and guidelines here: The lock guide

Want to download our product catalogues?

If you prefer to download our product catalogue - you can download it here
We also provide instructions, declarations and other documents in our download documents section.

Check it out!